Alamarin Jet AJ 160, Руководство по эксплуатации и обслуживанию

Страница: 32 / 40

Operation and Maintenance Manual
3232
Version 1.5
32
3. Open the fastening bolts (4 pcs) of the
stator.
After this, the stator, the deflector
and the nozzle come off as a whole . (In
figure 4.3.1-3 the reversing deflector has
been removed for clarity).
The fitting of the stator and the hull of the propulsion unit with
each other is tight. You can help the detachment by cranking with a
screwdriver.
Figure 4.3.1-4
4. Loosen the impeller’s fastening bolts
(figure 4.3.1-4) and completely remove
one of them. Screw it in the adjacent
threaded hole in line with the wedge
groove and tighten carefully. The plastic
fastening cone is released and the
impeller can be pulled off the shaft.
If the fitting is very tight, multiple bolts
are used as help.
Figure 4.3.1-3