Alamarin Jet AJ 160, Руководство по эксплуатации и обслуживанию

Страница: 10 / 40

Operation and Maintenance Manual
1010
Version 1.5
10
Before you set the boat afloat for the first time, make sure that the jet
has been installed according to the Installation Instruction.
This prevents the emergence of unexpected fault situations which can
lead to damages.
2. Operation
2.1. Using for the First Time
Starting:
In starting an engine equipped with the jet, the following things should be observed:
- The reversing deflector control lever must be in centre position.
- The possible gear must be in ”neutral” position.
- In a system without a gear the accelerator must be in ”idle” position.
See the effect of the position of the reversing deflector control lever on the position of
the reversing deflector on page 11.
Every propulsion unit has its own
serial number. The serial number has
been marked on the type label and in
addition it has been stamped both on
the body of the propulsion unit and on
the inspection hatch cover.
The places in which the serial number
can be found have been designated in
figures 1-2 and 1-3. The serial number
has also been recorded on page 8 of the
Instructions for Use and Maintenance.
Figure 1-2
Figure 1-3