GB
42
CS 4235
Safety instructions
tions. Plan your work in such a way that the
use of appliances that generate strong vibra-
tions is spread over several days.
■
If you notice an unpleasant sensation or disc-
olouration of the skin on your hands when us-
ing the tool, stop work immediately. Take suf-
ficient work breaks. Without sufficient breaks,
a hand/arm vibration syndrome can occur.
■
Minimise your risk of being exposed to vibra-
tions. Maintain the tool according to the in-
structions in the operating instructions.
■
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
■
Define how the vibration load can be limited
in a work plan.
3.6.4
Noise pollution
A certain level of noise exposure from this appli-
ance is inevitable. Carry out noisy work at ap-
proved and specified time periods. Observe rest
periods as necessary and restrict the duration of
the work to a minimum. For your personal protec-
tion and protection of persons in the vicinity, ap-
propriate hearing protection must be worn.
3.6.5
Working with the chain saw
WARNING!
Danger of serious injury.
If an incompletely mounted chain saw is
used, serious injury can be caused.
■
Only use the chain saw when it has
been fully mounted.
■
Before each use, perform a visual
inspection in order to check that the
chain saw is complete and does not
contain damaged or worn compo-
nents. Safety and protective devices
must be intact.
WARNING!
Risk of injury due to chain saw being
started inadvertently
A chain saw that is started inadvertently
can lead to serious injury. Therefore, re-
move the rechargeable battery during:
■
Testing, adjustment work and clean-
ing work
■
Work on the cutting equipment
■
Leaving the chain saw
■
Transport
■
Storage
■
Maintenance and repair work
■
Danger
■
Never work alone.
■
Always keep a first-aid kit to hand in case of
accidents.
■
Avoid touching metal objects in the ground or
which are conductively connected to the
ground.
■
The personal protective equipment compris-
es:
■
Protective helmet
■
Hearing protection (e.g. ear defenders,
especially when working for than 2.5
hours a day)
■
Protective glasses or face visor incorpo-
rated in the protective helmet
■
Protective trousers with cut protection in-
lay
■
Sturdy working gloves
■
Safety boots with high-grip sole and steel
toe caps
■
Do not use the chain saw above shoulder
height, since safe handling is no longer pos-
sible in this way.
■
When changing position, switch off the en-
gine and put on the chain guard.
■
When chain saws are not in use, always put
on the chain guard and remove the recharge-
able battery.
■
Switch the chain saw off before putting it
down.
■
Do not use the chain saw for levering or mov-
ing wood.
■
Only specialist personnel are allowed to saw
trunks that are thicker than the length of the
chain bar.
Содержание Solo CS 4235
