![AL-KO BKS 35 Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/al-ko/bks-35/bks-35_instructions-for-use-manual_2887783019.webp)
19
GB
470 009_d
BKS 35 / 40 II
1
Guide bar
9
Accelerator Lever
17 Rear handle
2
Chain saw
10 Fuel tank cap
18 Fuel pump (primer)
3
sprocket guard
11 Oil resevoir cap
19 Choke lever
4
Chain brake lever/fronthan-
dle guard
12 Fan housing
20 Air filter cover
5
Front handle
13 spiked bumper
21 Spark plug
6
Starter grip
14 Chain tensioning screw
22 Exhaust pipe guard
7
Engine stop switch
15 Chain catcher
23 Guide bar cover
8
Safety lock
16 Bar clamp nut
Assembly
Parts overview
(A)
Caution!
During all assembly work:
Turn off engine
Pull spark plug connector
Wear protective gloves
Guide bar and saw chain
Release chain brake. Pull hand guard in the
1.
direction of the front handle (G).
Loosen the guard bar clamp nuts (B/1) with the
2.
supplied screwdriver/combination key.
Take away the sprocket cover.
3.
Place guide bar on both guide bolts (C/1) and
4.
shove in the direction of the chain sprocket
(C/2).
Guide the saw chain around the sprocket nose of
5.
the guide bar (D/1) and insert into the groove of
the guide bar. Then pull the saw chain lightly in
the direction of the arrow (D/2).
Observe the direction of movement of the
saw chain (E).
The cutting of the saw teeth on the upper side of the
guide bar point in the direction of the blade points.
Direct the saw chain over the chain catcher.
6.
The saw chain hangs through somewhat on the
underside of the guide bar.
Controlling the chain tension
Control chain tension frequently.
The saw chain is tensioned correctly when it:
Lies on the underside of the guide bar
Allow it to raise about 3 - 4 mm in the middle of
the guide bar.
Allow it to be pulled through lightly by hand
At operating temperature, the saw chain elongates and
hangs through.
Install sprocket cover. Make sure that the chain
7.
tensioning hook latches in the guide bar. Where
necessary, pull the guide bar forward until the
hook latches.
Twist on guard bar clamp nuts hand tight.
8.
To control the saw chain, pull through somewhat
9.
by hand, so that these lie correctly on the chain
sprocket and in the guide bar.
Turn chain tensioning screw to the right until the
10.
saw chan fits on the bar underside (F).
Turn bar clamp nuts securely.
11.
Caution!
The device many only be operated after complete
assembly.
Содержание BKS 35
