AL-KO AT4F Series, Руководство по эксплуатации и сборке

Страница: 102 / 140

Translation of original operating instructions
102
AL-KO AT4F ATEX
Activity/unit components Measure / remark
Inspections to be performed at
monthly intervals
1 3 6 12 24
11.2 Function-preserving cleaning of the wa-
ter drain and parts of the fan that come
into contact with air
X
11.3 Vibration check! X
11.4 Check bearings for noise X
11.5 Grease bearings using a relubrication
device
X
11.6 Check flexible connection for leaks Repair X
11.7 Check function of vibration absorbers Repair X
11.8 Drive elements See item 12
11.9 Instrument and control facilities Check the function of pressure/volume
flow controllers
X
11:10 Check integrations of the fan into the unit
potential
Repair
12. Drive elements 1 3 6 12 24
12.1 Electric motors 1 3 6 12 24
12.1.1 Check the exterior for dirt, secure fitting,
damage, and corrosion
Clean and repair X
12.1.2 Check the direction of rotation (initial
commissioning)
12.1.3 Re-tighten connection terminals X
12.1.4 Measure tension Measured data must be documented in
the measurement log
X
12.1.5 Measure power consumption Measured data must be documented in
the measurement log
X
12.1.6 Measure phase symmetry Measured data must be documented in
the measurement log
X
12.1.7 Check bearings for noise X
12.1.8 Grease bearings using a relubrication
device
X
12.1.9 Check the function of the protection
device
Repair X
12.1.10 Check integrations of the motor into the
unit potential
Repair
12.2 Belt drive 1 3 6 12 24
12.2.1 Inspect for soiling, damage and wear Replace if necessary; use only dissipa-
tive/conductive V-belts.
X
12.2.2 Function-preserving cleaning Scope of services must be defined and
agreed upon.
X
12.2.3 Check for tension and alignment Readjust X
12.2.4 Replace belt Use only dissipative/conductive V-belts X
12.2.5 Check the function of the protection
device
Repair X