Introduction
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de
4
– The device may not be used for medical appliances applied to maintain human life or health, its con-
trol or other effect on them.
– The device may not be used in explosive environment.
– The device may not be used in atmosphere in which there are chemically active substances.
1.4 Limitation of liability
Our company does not bear any responsibility with respect to breakdowns or damages caused by using the
product in a manner other than described in the Manual or in violation of the current regulations and tech-
nical standards.
1.5 Safety
WARNING
Ensure the mains voltage matches the voltage marked on the nameplate.
Ensure the device is provided with its own power supply line and electric fuse.
WARNING
The device terminals may be under a dangerous voltage. De-energize the device before
working on it.
Switch on the power supply only after completing all works on the device.
NOTICE
Supply voltage may not exceed 48 V. Higher voltage can damage the device.
If the supply voltage is lower than 10 V DC, the device cannot operate properly but will
not be damaged.
NOTICE
If the device is brought from a cold to a warm environment, condensation may form in-
side the device. To avoid damage to the device, keep the device in the warm environment
for at least 1 hour before powering on.
