© 2019 AKW
13-012-085-17
Fitting to Wall
15
Fitting to Wall
Installer
It is essential to remove any debris and/or brick dust that could otherwise damage
the unit.
Do not make any alternative or additional fixing points, as this will invalidate the
warranty. Check for hidden cables and water pipes.
Use the fitting template provided
CAUTION
READ INSTRUCTIONS
BEFORE INSTALLING
THIS PRODUCT
116 mm
Use Spirit Level Here
Use Spirit Level Here
Ensure the template is level and temporarily
hold in position with tape. Mark the 3 fixing
points on the wall
Remove the fitting template from the wall
and drill the marked fixing points. Before
drilling, ensure there are no cables or water
supplies running within the wall
Insert wall plugs and screw the top two
screws to the wall. Note: the bottom screw
should only be fitted during final installation
Tip: use masking tape on tiled walls to prevent
slipping and tile splintering. Always use a
tile drill bit when drilling tiles.
