General:
01905 823 298
|
www.akw-ltd.co.uk
12
12
C
onne
C
TI
ng
f
lo
W
Sen
So
R(
S)
Connecting flow Sensor(s)
ensure the pump spacers are used to prevent the cables from being trapped.
ensure sensor and filter are in an easily accessible location. If possible, avoid installing in a loft
space.
ensure all cables and pipes are behind water resistant surfaces.
The pump has two flow sensor cables. for mixer showers with two water feeds, connect both flow
sensors. fit one flow sensor to cold water feed pipe and one to the hot water feed pipe.
for electric showers only connect one sensor, the other sensor wire must be terminated in a
connector block and insulated using electrical insulation tape at a dry location.
failure to do this may damage the pump.
note: To connect the pump directly to a compatible electric shower please see the instructions
supplied with your electric shower.
all cable connections must be in a dry location.
+
S
aKW
flow Sensor
Wire
Red
brown or Yellow
black
Connector block
Red
White
black
Pump Wire
