6
Mount all inlet pipes. In sections of aquariums without
glass partitions, use the pipe with 3 taps. In sections of
aquariums with one glass partition, use the pipe with 6
taps. In sections with 2 partitions, use one of each type of
inlet pipe.
Lay the top shelves on the shelving unit. Check that the
spacer pieces at the top of the unit are in place.
Lay the ballast boxes for the light-fittings on top of the
shelves.
Arrange the ballast boxes so there are 3 over each ladder.
Pull out the mounting strip
and insert the light-fitting.
Place light-fittings over the
three upper bays of each
section.
Insert the plugs from the
ballast boxes in the 4-point
sockets.
All parts for the hinges.
Screw the hinge bases to
the front side of the shelv-
ing unit.
Before screwing base no. 2
to the ladder, the steel pegs
with washer and split pin
must be mounted.
