10
Tighten the nuts well.
Screw the overflow pipes
into the bushings.
Mount the O-rings on the
unions at the bottom of the
return pipes.
Place the perforated pipes
down over the overflow
pipes.
Mount the end pieces onto
the doors.
Place a washer on the steel
peg.
Do the same on the oppo-
site side.
Carefully pull on the end
piece and guide the steel
peg into the hole.
Push the steel peg out
through the hole with a
finger from the rear side.
Mount the washer and
split pin. Bend the split pin
round the steel peg.
Insert the doors in the shelving unit. Let it rest on the
steel pegs.
Mount the connecting pipes which bring the water down
to the filters. For sections without glass partitions in the
aquariums use the “Sincon” type.
For sections with 1 or 2 glass partitions, use the types
“Docon” or “Tricon” respectively.
