English
- 6 -
Before Switching On Your TV
Power Connection
IMPORTANT:
The TV set is designed to operate on
220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambi-
ent room temperature before you connect the set to
the mains.
Connections To The Aerial Input Socket
• Connect the aerial or cable TV plug to the Aerial input
socket located at the rear of the TV and connect the
cable plug coming out from the TV out socket lo-
cated on the devices (VCR, DVB etc.) to this socket
as well.
VHF/UHF
75
REAR OF THE TV
CABLE TV
Inserting Batteries In The Remote
Control Handset
WARNING :
Remote control is battery included. A plas-
tic protector is used to disconnect the batteries in
order to prevent the battery life from reducing. Please
remove the plastic protector before the first use.
• Remove the battery cover located on the back of the
handset by gently pulling backwards from the indi-
cated part.
• Insert two
AAA/R03
or equivalent type batteries.
Place the batteries in the right directions and replace
the battery cover. (observing polarity)
Note: Remove the battery from remote control hand-
set when it is not to be used for a long period. Other-
wise it can be damaged due to any leakage of bat-
tery.
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power to 220-240V AC 50 Hz. Press
stand-by button.Then the TV switches itself to
stand-by mode (Optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
channel number is selected, or Press the -P/CH or P/
CH+ button on the TV or press the Ch+ or Ch- button
on the remote control, so that last mode switched off
is selected.
By either method the TV will switch on.
To switch the TV off:
Press stand-by button on the remote control or stand-
by button on the TV so the TV will switch to standby
mode. To power down the TV completely, unplug the
power cord from the mains socket.
Navigating the Menu System
MENU
TV/DTV
OK
For Displaying
Menu Options
For Navigation
To Confirm Choices
1-
Press
“MENU”
to display the menu.
2-
Press “
” or “
” button to select an icon. Press
“
” for more options.
3-
Use “
” or “
” button to highlight.
4-
Press “
” or “
” buttons to change the settings.
Press
OK
to set as default.
5-
To exit the menu or return from sub-menu screen,
press
“MENU”
.
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
ENG-40756W-1055UK-40 INCH 17MB22 UK IDTV-(VIRTUAL DOLBY-WO PIP-WO PC)-50117255.p65
16.10.2007, 09:16
6
Содержание AV42751-HDID
Страница 30: ......
