13. Hotel Mode
Hotel Mode is for users that require limited access to services and levels, such as “Volume” where the full volume
level can cause a problem.
21
20
The “default “setting is “Off”. To activate Hotel mode, press the Main
Menu button and select “Lock” menu. “Fig 33”. To enter the Lock
menu you must press the
▼
button and enter the “Pin number” “0000”
default. Use the
▲
/
▼
buttons to select “Hotel Setting” and press the
OK button . Fig 34 will now be displayed. Use the
▲
/
▼
buttons to
select “Hotel Lock, and use the
►
/
◄
buttons to select “On or Off”. If
set to “Off” all the items below are “greyed out”.
Lock Channel
. If set to “On” will lock the TV to the Channel displayed
in the Channel number box, this cannot be changed
. Note :-The
channel number can be changed in the normal menu.
Set Source.
Use the
►
/
◄
buttons to select the signal source.
Normally set to “Off” you can select, DTV, Radio, Data, ATV, Media.
Channel Number
. For information only.
Picture Lock
. Normally set to “Off”. When set to “On” locks the
Picture level settings, e.g Brightness.
Key Lock
. Normally set to “Off”. When set to “On” locks the User
Buttons on the TV.
Max Volume
. Normally set to 100. To reduce the Maximum volume
level use the
►
/
◄
buttons to set the required level.
Source Lock
. Select and press the OK button. Fig 35 will be
displayed. In “default” mode all sources are selected as “Off”. To stop
the use of any input source, use the
▲
/
▼
buttons to select and the
►
/
◄
buttons to set “On”.
Clear Lock.
To reset all Hotel Mode settings to “Default” select and
press “OK”.
Fig 33
Fig 34
Fig 35
