5. Remote Control.
7
6. Connections.
IMPORTANT. When making connections ensure the TV is disconnected from the Mains supply
input, and that the appliance being connected is also disconnected from the mains supply.
HDMI.
Input from HDMI source (High Definition)
VGA.
PC input (RGB).
SCART.
Audio /Video input and output. (General quality).
S-VIDEO.
Suitable for camcorder input.
CVBS
. Low quality video input (1vPP 75
Ω
)
AUDIO L/R.
Low level audio inputs used in conjunction with CVBS input.
PC AUDIO
. Stereo audio input from PC (Used in conjunction with VGA input).
“HEAD PHONES”
. Stereo output to headphones only.
TV TUNER
. RF input from TV aerial or cable source.( 1 m/V @ 75
Ω
) typical.
CI SLOT
. Place a CAM (Conditional Access Module) into this point to allow a “Pay per View” card
to be used.
Battery Fitting and Disposal
1.
Open the battery cover
2.
Fit two “AAA” batteries. Ensure the battery polarities are correct i.e + to + and – to -.
3.
Replace the battery cover
To prevent injury, do NOT break open or throw exhausted batteries in a fire.
Do not mix batteries, old and new, Carbon or Alkaline.
Do not use re chargeable batteries.
Remove batteries if not using the remote control for long periods to prevent leakage.
If the batteries do leak, clean the compartment with soapy water and scrape any residue
from the contacts. To NOT touch or ingest battery residue.
Should you swallow chemicals leaked from a battery, please URGENTLY consult a medical
adviser.
4. In the event that the remote control does not function, please check that the + VE end of
the battery terminals are in contact with the connection spring. Some batteries have a
s VE terminal and may not reach the spring. You can stretch the spring slightly to
ensure connection
Do Not place used
batteries in domestic
waste, consult your
battery retailer or your
local waste disposal
company for advice.”.
