SAM
™
SMART NOZZLE N
2
P
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
PHONE: 800.228.1161
www.akronbrass.com
Sheet: 128570
Revision 06/28/2022
Page: 15 of 34
14. DISPLAY LED INTENSITY LEVELS AND RESETTING
The
SAM™ SMART NOZZLE LED display is adjustable from LOW-MEDIUM-HIGH LED intensity levels.
The nozzle comes from the factory preset at LOW intensity.
LED intensity level is adjusted at the UV1100 screen. To change the intensity setting reference the UV1100
instructions.
15. CHECKING BATTERY CHARGE LEVEL
Battery charge level can only be displayed on the
SAM™ SMART NOZZLE when
the
SAM™ truck is in road mode. When the SAM™ truck is in pump mode, the
battery charge level can still be viewed from the UV1100 screen.
From the UV1100 screen on the
SAM™ truck display, navigate to the “check battery” option and click the
applicable button. Each synced and paired
SAM™ SMART NOZZLE will then indicate its remaining battery
charge level via its LED display, as shown below. Battery level can also be viewed while in pump mode by
pressing the info button on the active discharge.
