SAM
™
SMART NOZZLE N
2
P
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
PHONE: 800.228.1161
www.akronbrass.com
Sheet: 128570
Revision 06/28/2022
Page: 17 of 34
To configure adaptable parameters or to observe available diagnostic conditions, select the link to “6055
SAM Nozzle” from the akronbrass.net home page. The arrow ( ) indicates what hyperlink text or button
to select at each step, for the given examples, or points out a key difference(s) in a given step.
[NOTE: To exit, or disable Wi-Fi mode, simply press one of the
SAM™ SMART NOZZLE buttons. This will
place the
SAM™ SMART NOZZLE in a “sleep” state. Pressing one of the SAM™ SMART NOZZLE buttons
again will wake it back up. Alternatively, the user can cycle power on the
SAM™ SMART NOZZLE by
removing and reinstalling its batteries.]
The AkronBrass.net home page is shown below.
16.4 SAM Nozzle Configuration (Standard Mode)
There are presently four (4) different tabs available in Standard mode. The images that follow step through
the various configuration details and options pictorially. The end user should only ever operate the
SAM™
SMART NOZZLE in Standard mode unless otherwise instructed by Product Support.
