Quark SC. User Manual
3
21. For AC line powered units - Before returning repaired unit
to user, use an ohm-meter to measure from both AC plug
blades to all exposed metallic parts. The resistance should be
more than 100,000 ohms.
22. To prevent fire or shock hazard. Do not use this plug with
an extension cord, receptacle or other outlet unless the blades
can be fully inserted to present blade, match wide blade plug
to wide slot fully insert.
TERMS OF USE
Your unit comes with a serial number sticked on it. Do not tear
the serial number; this can result in void guaranty.
SAFE AND EFICIENT USE
Select carefully the emplacement of the unit. Avoid placing it
under direct sun exposure. Avoid humid and damp places or
rough environments with excessive dust and vibrations and
excessive heat or cold. Also keep it away from humming
sources like the motors of whirl washers or transformers or
similar appliances.
No liquids must be close to the unit so that they can be spilled
on it. To completely disconnect the unit from you mains supply
unplug the plug of the adapter from the wall electric outlet.
The switch that controls the supply of electrical power to the
unit must be at easy reach in case is necessary a fast switch
off.
WARNING: do not place the unit in a closed environment
where is difficult to access the wall outlet.
Do not open the unit; it can cause personal injuries or the
damage of the equipment.
When unplugging the power supply cable of the adaptor from
the wall outlet, does not pull the cable. Take the plastic body of
the plug and unplug it.
Do not handle roughly the controls of the unit you can shorten
their lifespan.
Before moving the equipment, remember to unplug all cables.
Do not use chemical solvent to clean the unit. A dry and clean
cloth will do fine.
Safe this manual at reach so you can go back to the basic in
case you need it.
PRELIMINARY
Check the contents of the QUARK SC box and find the
following items:
1- Controller
1- Installation and instructions CD
1- Traktor Overlay
1- USB Cable (PC/MIDI)
1- Transfomer AC/DC
FIRST STEPS
Equipment installation
Install the equipment on a stable and horizontal surface.
Avoid placing it under direct sun exposure humid and damp
places or rough environments.
Place the equipment as far away as possible of other audio
equipment as radios TVs etc.
This product shall not be treated as
household waste. Instead it shall be handed
over to the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product.
The recycling of materials will help to conserve natural
resources.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Содержание Quark SC
Страница 1: ...User Manual...
