Quark SC. User Manual
14
-Hot cues can be deleted by pressing the cue button while
holding the button labelled with a bin.
-Press SHIFT + HOT CUE 1 to activate/deactivate Smart Hot
Cue.
-A yellow lit button means that there is a hot cue saved.
AUTO LOOP (round button orange):
-An autoloop is set by pressing any of the 6 numbered buttons.
The autoloop size depends on the pressed button and can be
set from 1 to 32 beats.
-The autoloop is deactivated by pressing the button
corresponding to the actual size.
-Change the loop size by pressing a button which has
associated a size different than the actual active loop size.
-Press SHIFT + HOT CUE 1 to activate/deactivate Smart
Loop.
-In this mode all buttons will light orange. The button
corresponding to the active loop size will blink.
LOOP ROLL (round button green):
-An autoloop is set by pressing any of the 6 numbered buttons.
The autoloop size depends on the pressed button and can be
set from 1/32 to 1 beat. The loop will be active only while the
button is hold.
-Press SHIFT + HOT CUE 1 to activate/deactivate Smart
Loop.
-In this mode all buttons will light green. The button
corresponding to the active loop size will blink.
4. DECK SELECT
Switch between decks A/C and decks B/D.
5. LOOP
-Set the starting point of a loop by pressing IN button.
-Press OUT button to set the ending point of the loop.
-Press RELOOP to jump to the starting point of the loop. If loop
is not activated, the last set loop will be activated.
-Press SHIFT + IN to enter in a mode in which the starting
point of the loop can be modified, IN ADJUST. The IN button
will blink while this mode is active. Turn the jogwheel to modify
the starting point. Press SHIFT + IN to exit from the mode. If
this mode is active but there is not any loop active, the last set
loop will be activated when the jogwheel is turned.
-Press SHIFT + OUT to enter in a mode in which the ending
point of the loop can be modified, OUT ADJUST. The
performance of this mode is equivalent to the IN ADJUST
mode but in this case the ending point is adjusted.
-Enter to MOVE LOOP mode by pressing SHIFT + RELOOP.
Performance is similar to IN/OUT ADJUST but in this case
loop can be moved..
6. JOGWHEEL
Press SCRATCH button to toggle the wheel mode between
CDJ and Vinyl.
-Use the jogwheel to scratch or modify the pitch bend.
-Use SHIFT + jogwheel to search through the track
-Under Video mode press SHIFT + turn jogwheel to adjust the
parameter of the effect
7. TEMPO
-Use the Pitch Fader to control the deck's tempo.
-Use the Pitch Bend buttons for pitch bending.
-Tempo Range can be selected by pressing SHIFT + pitch
bend (-).
-Reset the tempo by pressing SHIFT + pitch bend (+).
8. TRANSPORT
-Press Play/Pause button to Start/Stop playback of deck.
-Press SHIFT + Play/Pause to skip to the first beat of the track.
-If song is paused, set a new cue point or if you are in the cue
point position play the track from the cue point by pressing the
CUE button and return to cue point when released. If song is
playing, press CUE to pause the reproduction and jump to the
last cue point.
-Use SHIFT + CUE to activate/deactivate Smart Play.
-Use the SYNC button to match the BPMs of different tracks.
-Press SHIFT + SYNC to set to master the deck in which it has
been pressed.
9. MIXER
-Tweak the sound using the 3-Band EQ
-Turn the MASTER knob to adjust the volume of the master
signal.
-Adjust the deck volume by turning the gain knob.
-Select the deck that must be pre-listened by pressing the
Monitor buttons (labelled with headphones).
-Press SHIFT + Monitor button to select the beat of the
working deck which will be shown in front in the display.
-Use the Linefader and Crossfader for mixing.
-Use AUTO buttons to automatically crossfader to the other
deck.
-Under Video mode press LINK to link or unlink the video
crossfader to the audio crossfader.
-Under Video mode use AUTO to move the video crossfader
automatically.
10. BROWSER
-Turn the encoder to scroll through the songs.
-Press SHIFT + turn the encoder to scroll through the folders.
-Load the song to the active deck by pressing LOAD buttons.
-Press the encoder to open or close the subfolders of the
selected folder (when focus is on folders).
-Press SHIFT + encoder to open or close the subfolders of the
selected folder (when focus is on folders).
-Switch the mixer section between mixer and video by pushing
VIDEO MODE.
Содержание Quark SC
Страница 1: ...User Manual...
