( 9 )
Press <GREEN> button to enter
Manual Scan
Page.
(10)
Press <Up/Down> button to select
Frequency
option.
(11)
Press <0~9> button to input the
Frequency
value.
(12)
Press <Up/Down> button to select
Bandwidth
option.
(13)
Press <Left/Right> button to set
Bandwidth
value.
(14)
Press <OK/Exit> button to start scan or exit. See Figure 2.
2.Menu Operations
Once the channel scan is finished and all the channels are stored into the
database,
you can start to watch the digital terrestrial TV channel or listen to the radio
broadcast, some typical operations are given in this chapter.
2.1 Main Menu
Main Menu
for operating a lot of functions.
(1)
Press <Menu> button to enter
Main Menu
.
(2)
Press <Info> button to display the version information of STB.
2.2 SETUP
Set the system settings of STB.
2.2.1 Installation
Set the receiving and playing program settings of STB.
2.2.1.1 Antenna Setting
Set the antenna power on or off to 5V power to antenna or not.
Note:
The default is
OFF
, set this option to
ON
only if this STB is connected
to an active antenna which amplifies the received RF signal, otherwise please set
it to
OFF
.
2.2.1.2 Country Setting
Set the country for
Auto Scan
,
Manual Scan
and
Time Zone
.
Note:
Change the
Country Setting
will automatically change the default
Time
Zone
and
set the default
Frequency
and
Bandwidth
for
Auto Scan
.
6
Figure 2. Manual Scan edit
MANUAL SCAN
01/01/2008 02:19
Channel No.
Frequency
CH .21
474.000 Mhz
Move
Move
Exit
Edit
Bandwidth
8 Hz
Scan
OK
65 %
94 %
Strength
Quality
