User Interface
1.1 Setting Country and Language
User can select preferred country and language at
Setup - Installation
page.
(1)
Press <Menu> button to enter
Main Menu
.
(2)
Press <Left/Right> button to select
SETUP
option.
(3)
Press <Up/Down> button to select
Installation
option.
(4)
Press <OK> button to enter
Installation
page.
(5)
Press <Up/Down> button to select
Country
option.
(6)
Press <Left/Right> button to set
Country Setting
.
(7)
Press <Up/Down> button to select
OSD Language
option.
(8)
Press <Left/Right> button to set a language.
If there is no channel database in the STB, it will start at step
(5)
directly when booting.
1.2 How to receive the programs?
Scan the possible frequency and bandwidth to receive the programs.
Press <RED> or <GREEN> button to start
Auto Scan
or
Manual Scan
.
1.2.1 Auto Scan
Auto Scan
will erase the database first, and scans default frequency and bandwidth by
Country Setting
. Follow the steps
(1)
~
(8)
at section
1.1
.
(9)
Press <RED> button to be confirmed to clear the database.
(10)
Press <OK> button to confirm clear action and start
Auto Scan
.
It costs time to do
Auto Scan
, user can press <Exit> button to exit at anytime. See
Figure 1.
Later if you want to scan again, you can follow above Quick Installation procedure.
Figure 1. Clear database message
1.Quick Installation
5
1.2.2 Manual Scan
Manual Scan
adds the scanning results into database, it doesn't erase the
database.
But the User has to know the
Frequency
and
Bandwidth
for scanning.
If the user scans the same
Frequency
and
Bandwidth
more than once, the
previous programs will be overwritten. Follow the steps
(1)
~
(8)
at section
1.1
.
SETUP. Installation
01/01/2008 00:19
Country Setting
Antenna_Setting
England
OFF
Move
Switch
Exit
Manual Scan
Auto Scan
OSD Language
English
Audio Language
Subtitle Language
LCN
OFF
ON
English
Exit
YES
OK
Database will be cleared! Continue?
