Akerstroms Tx800 Triton, Руководство пользователя

Страница: 48 / 58

Appendix User Manual Tx800
48 E-EQ-TX800OGWW-D-ARC
V Tx800 Software
The following software is installed on a new Tx800.
Freefloat WLinq
WLinq is an integration tool for auto-id solutions. Featuring communication and control to devices
connected to COM-ports, physical or virtual (USB and Bluetooth). For use it with barcode readers, scales,
RFID readers and other serial devices.
WLinq is bundled with the Tx800. It will run in demo mode, if installed from scratch, or normal mode,
based on the original installation licensing regulations. Stand-alone licences for WLinq can be ordered
from Åkerströms Trux AB.
•
wlinqeng.exe (English version)
•
wlinqswe.exe (Swedish version)
Tx800 Computer Manager
Handles settings for; sound, light, power from ports, UPS, start-up and shutdown etc. Install the
application with all options checked.
Freefloat Access One Terminal Emulator
Terminal emulating software for accessing mainframes, AS/400:s, Unix hosts etc.
Trux Speedometer
Handles Speedstep technology supported by some CPUs. Make sure the Trux 800 power scheme has been
installed and selected. This is done via Control Panel->Performance and Maintenance->Power
Options->Power Schemes.
Touchscreen software
Drivers to support the touchscreen and software for calibrating the pointing-accuracy.
Select COM3 in the installation wizard.
Communication devices
Install the proper software for your communication device,
e.g. WLAN card.
Tx800 device drivers
All the device drivers are preinstalled.