AKE Bluetooth helmet set 101, Инструкции по эксплуатации и монтажу

Страница: 19 / 24

19
ENGLISH
Please mind the following safety advices:
Only use AKE-approved original batteries. Never connect the
charger if the battery is not connected to the electronic box. Without
a battery or with a wrong battery, the equipment might get damaged!
Always charge the battery by using the plug socket of the electronic
box. Do not try to directly charge the battery (explosion risk)!
Do not use the helmet set when charging!
With which devices can the helmet set be connected?
Switch-on and switch-off
Pairing
The Bluetooth helmet set 101 can be used with all Bluetooth devices that are
compatible to hands-free or headset protocol, e.g. Bluetooth mobile phones,
navigation systems or any other of the motorbike communication systems out of
the
series from with Pair-and-Go Bluetooth helmet connector,
so e.g. also the fit-for-motorbike hands-free-kits from .
Press the multifunctional button for approx. 2 sec. to switch on the Bluetooth
helmet set. Press the multifunctional button approx. 5 sec. to switch off the
Bluetooth helmet set. When switching off, a red light will show in the display.
PowerCom
AKE
AKE
Before using your Bluetooth helmet set for the first time, you have to pair it with
your Bluetooth phone or device. Make sure that the battery is fully charged. For
instructions on setting up and pairing the other Bluetooth devices please refer to
the respective user manuals.
To start, please switch off the Bluetooth helmet set.
1. Press multifunctional button for 6 seconds. Release button when indicator
light flashes red and blue. The Bluetooth helmet set is now ready to pair with
PowerCom
Mobile
phone
2-way
radio
Navi-
gation
Car
radio
MP3 /
iPod
Mobile
phone
Navi-
gation
Motorrad-
Kommunikationssystem