manualshive.com logo in svg

Akai S3200XL, Руководство оператора

Поделиться
Скачать
Akai S3200XL Скачать руководство пользователя страница 243

LOAD

S3200XL Operator’s Manual - Version 1.00

Page 229

IMPORTING SOUNDS FROM OTHER MANUFACTURER’S CD-ROMS

On the S3200XL, as well as having access to a vast range of Akai sound library, you may also
import sounds from CD-ROMs made for certain samplers made by other manufacturers thereby
giving you access to even more sounds. This is done in the SCSI page.

Assuming your CD-ROM is on a SCSI ID other that 5, change the SCSI ID here in the

 field to match that of the CD-ROM drive you are using and press F7 or F8 as

appropriate. The following example shows loading sounds from an EXIIIP CD-ROM.

Pressing F8 will show the following screen:

To load an Akai volume (as opposed to a whole CD-ROM volume), simply move the cursor to
the volume name field and press 

 and/or 

. All programs that are contained in the

volume 

 will be loaded.

To load a single program, move the cursor to the program you wish to load and press 
and/or 

.

To load a program and all programs that follow it, move the cursor to the program field and
select the program you want to have as the first in the list of programs you will load. Now place it
at the top of the screen by using the DATA wheel, scrolling to place it at the top of the list
shown in the right of the screen. Move the cursor to the volume field and press  

 and/or

. This will load the program shown at the top of the list and all those shown below it.

NOTE: If any programs below the select program are ‘off screen’, these will also be loaded.

For example, if in the above example, you want to load BRIGHT GRAND and all programs after
it, move the cursor to BRIGHT GRAND, scroll it to the top of the list using the DATA wheel and
press 

 and/or 

.

NOTES REGARDING LOADING OTHER MANUFACTURERS SOUND LIBRARY

There are certain restrictions when loading sounds from other manufacturer's CD-ROMs.

NOTE: Although all references in this explanation refer to CD-ROM containing other
manufacturer’s sound library may also be used.

•

Layered programs using several ‘presets’ or those made using several ‘patches’ will be
loaded as a single ‘preset’ or ‘patch’ into the S3200XL. In this case, load all the single
‘elements’ (i.e. presets or patches) and layer them in the MULTI mode.

•

If there are more than 128 programs in the volume, the S3200XL will ‘wrap’ around’
programs 129 and onwards so that #129 becomes #1, #130 becomes #2, etc.. You can
renumber these on the S3200XL if you wish in SINGLE or MULTI using the RNUM
function.

•

Due to different sound parameter configurations amongst different samples, the S3200XL
will convert certain program parameters to make them compatible with Akai program
parameters (sample data is not affected). However, this may cause the sound to be slightly

Содержание S3200XL































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды