manualshive.com logo in svg

Akai S3200XL, Руководство оператора

Поделиться
Скачать
Akai S3200XL Скачать руководство пользователя страница 225

S A V E

S3200XL Operator’s Manual - Version 1.00

Page 211

NOTE: To rename a disk or a file on a floppy disk, removable cartridge or Magneto Optical disk,
write-protection must be off.

At any time, press F1 - SAVE - to return to the main SAVE screen.

DELETING ITEMS FROM DISK

Pressing the 

 key displays this screen:

You can delete a file (or files) from a floppy disk or hard disk.  If you have a hard disk fitted,
select the volume using the parameter field on the first line.  There are a number of options that
you can pick to determine what file(s) will be deleted.

CURSOR ITEM ONLY

As  its name suggests, deletes only that file which is
highlighted by the cursor.

ALL PROGRAMS ONLY

This deletes all programs, but not their associated samples.

ALL SAMPLES 

This deletes all samples on the current volume.

ENTIRE VOLUME 

This is the most drastic, erasing all data on the volume.

OPERATING SYSTEM

This removes the operating system from the volume.

NOTE: In order to delete a file or files from a floppy disk, removable cartridge or Magneto
Optical disk, write-protection must be off, of course.

At any time, press F1 - SAVE - to return to the main SAVE screen.

Содержание S3200XL































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды