- 11 -
Troubleshooting
Before calling for service make the following simple checks.
If problems still remain, please try to turn the TV set off for a few minutes so as to clean the unnecessary static accumulation, and
then turn it on again. If it is still useless, please contact with our dealer or our company’s Service Department.
Do not attempt to repair this appliance yourself as opening covers may let the warranty card to invalidation.
Problem
Cause
Solution
No Power
1. Power cord is unplugged.
1. Connect power cord securely.
2. Remote control batteries are weak.
2. Replace with new batteries.
1. Connection is not correct
1. Make the connection to be correct.
No Sound
2. Disc dirty.
2. Clean the disc.
3. Mute is engaged.
3. Press the MUTE button.
No Picture
1. Connection is not correct.
1. Make the connection to be correct.
2. Adjustment is incorrect.
2. Adjust the TV ’s AV/TV mode.
No Color
1. System selection is wrong.
1. Select the correct system according to your TV.
2. The chroma is incorrect.
2. Readjust the chroma.
1. No disc.
1. Place the disc.
2. Disc is not placed properly.
2. Replace the disc with the label side upward.
3. Condensation on laser pickup.
3. Switch on and take out the disc, wait for about 1-2
Not read disc
hours with the power on before using the player.
4. Laser pickup len is dirty.
4. Use the cleaning disc to clean it.
5. The disc is not standard or out of quality.
5. Try to press the OPEN/CLOSE button for several times.
6. The disc the unit can not distinguish.
6. Take out the disc.
Remote control
1. The remote hasn ’t point to the remote control sensor.
1. Point the remote control to the remote sensor.
malfunction
2. The distance is more than 8m.
2. Short the distance.
3. Weak batteries.
3. Replace batteries.
1. Disc compression is bad.
1. It will resume to normal playback after 5-10 seconds.
Moment
2. Press the wrong button.
2. Press the correct button.
Malfunction
3. Static leaks into the player.
3. Turn the player off for 1-2 minutes, and then
turn it on again.
Picture
1. The cause belongs to the disc.
1.Change another disc.
Faintness
2. The TV hasn’t been adjusted well.
2. Adjust the TV definition to the best.
Timer-controlled
1. Clock is not set to present time.
1. Set the current time again.
function does
2. Timer mode indicator is not lit.
2. Press ENTER button to confirm.
not operate
Line out no output Volume on minimum level
Increase volume level