GB- 10
OPERATING WITH REMOTE CONTROL
TO SELECT TV STATION USING THE PROGRAM NUMBERS:
1. Program Number Up and Down [13]
Press the CH. " " or " " button to select a higher or lower program number.
2. 0 - 9 Digit Button
To select TV stations using program numbers
0
-
9
. The selected program number will be shown in the left corner of the top
of screen in yellow colour.
For example:
Press "9" digit button to select program "9".
3. Two Program Number [19]
To select TV station using program numbers "10" - "99".
For example: selecting program 12
*
Press the button "-/- -"
*
Then press the number "1" button, on screen will show "1-"
*
Then press the number "2" button, channel "12" will show.
4. Personal Preferences Button ( PP ) [40]
Press (PP) button to select the picture effect.
PP MILD STANDARD DYNAMIC
Stand-By Button
(
) [25]
•
Press the "
" button to switch ON/OFF the picture and sound.
•
To switch on the TV from stand-by mode, just press any desired program number (0-9).
Mute Button
[24]
•
Press the mute button to switch OFF the sound, press once again to switch ON the sound.
TV Mode Button
[43]
•
Press the TV Mode button to select the TV mode.
TV/AV Mode Button
[42]
• Press the AV/TV mode Button to select AV mode, press again back to TV mode.
DVD Mode Button
[41]
• Press the DVD Button to select DVD mode.(It need a few seconds to start the DVD).
NOTE:
•
The transmission code of the remote control is different between TV and DVD, before using the remote control handset to
control the TV, press the TV button. To control the DVD, press the DVD button, to make sure the transmission code is correct
for TV and DVD, otherwise some keys on the remote hand set will not function.
Содержание CT-S21MTD-E3
Страница 1: ...GB 1 GB 1 16 NL 1 16 F 1 16 21 51CM COLOUR TELEVISION CT S21MTD E3 ...
Страница 17: ...GB 17 ...