More about Fibra protocol (in progress)
Sending events to the monitoring station
The Ajax security system can transmit alarms to the
monitoring
app as well as the central monitoring station (CMS) in the formats of the
SurGard (Contact ID)
,
SIA (DC-09)
,
ADEMCO 685,
and other proprietary
protocols. A complete list of supported protocols is
StreetSiren Fibra can transmit the following events:
When an alarm is received, the operator of the security company monitoring
station knows exactly what happened and precisely where to send a fast
response team on the site. Addressability of each Ajax device allows you to
send not only events to the PRO Desktop or to the CMS but also the type of the
device, the name of the device, and the virtual room to which the detector is
assigned. Note that the list of transmitted parameters may differ depending on
the type of CMS and the selected protocol for communication with the
monitoring station.
The device ID, the loop (zone) number, and the bus number can be found in its
Siren placement
When choosing where to place the device, consider the parameters that affect
the operation of the siren: the level of Fibra signal, the length of the connection
cable, the audibility of the sound signal, and the visibility of the LED indication of
the siren.
Which CMSs can the Ajax security system be connected to
1.
Tamper alarm / recovery.
2.
Alarm due to loss / restoration of the main power.
3.
Loss / restoration of connection to the hub.
4.
Temporary deactivation / activation of the siren.
