With after-alarm indication the users and passing security companies patrols
can see that the system was triggered.
The siren after-alarm indication does not work for always active detectors, if the detector
was triggered when the system was disarmed.
To enable the siren after-alarm indication, in the
1. Go to siren settings:
2. Specify about what events the sirens will indicate with LED inform about by
double blinking of the LED before the security system is disarmed:
3. Select the sirens which will participate in after-alarm indication. Go back to
Siren Settings
. The new parameters will be saved.
4. Click
Back
. All setting will be applied.
How to set Chime
Chime
is a sound signal that noti es about the triggering of the opening
detectors when the system is disarmed. The feature is used, for example, in
stores, to notify employees that someone has entered the building.
1.
The system registers the alarm.
2.
The siren plays an alarm sound (the duration and volume depend on
settings).
3.
The siren’s LED and the external LED (if connected) blink twice every 3
seconds until the system is disarmed.
Hub
→
Settings
→
Service
→
Siren Settings
Con rmed alarm
Uncon rmed alarm
Lid opening