The volume level is measured 1 m away from
the siren.
Alarm duration, sec
Determines how long the siren sounds in case
of alarm: 3 to 180 seconds for each operation.
Set in increments of 3 seconds.
LED indication
Settings of the StreetSiren Fibra LED indication:
Noti cation settings
Opens the siren noti cation settings. A detailed
description of the settings is
Activate the siren if the siren enclosure is
opened
When enabled, the siren will be activated when
a tamper triggering is detected.
Activate the siren if there is no power on the
buses
When enabled, the siren will be activated when
a loss of main power is detected.
Fibra Signal Strength Test
Switches the siren to the Fibra signal strength
test mode.
The test allows you to check the signal strength
between the hub and StreetSiren Fibra and
determine the optimal installation location.
Learn more (in progress)
Muted
— the siren does not sound in case of
alarm.
Quiet
— 85 dB volume.
Loud
— 100 dB volume.
Very loud
— 113 dB volume.
Off
— LED indication is off.
Armed
— LED blinks once every 2 seconds
only when the system is armed.
Always
— LED blinks once every 2 seconds
regardless of the arming mode.
