For the Ajax security system, MultiTransmitter acts as a single device and each
connected device or detector occupies a single slot in the limited number of the
hub devices — 100 in
and
Wired detectors can be connected to MultiTransmitter both before and after connecting the
module to the hub.
Before starting connection
Only users with administrator rights can add MultiTransmitter to the hub.
In order to connect MultiTransmitter
1. Install the
. Add a hub to the app and create at
least one room.
2. Check that the hub is on and has access to the internet (via Ethernet cable, Wi-
Fi, and/or mobile network). You can do this in the Ajax app or by looking at the
hub logo on the front panel. The logo should light up white or green if the hub is
connected to the network.
3. Ensure that the hub is disarmed and does not start updates by checking its
status in the app.
1. Go to the Devices tab in the Ajax app and click Add Device.
2. Name the integration module, scan or enter the QR code manually (located on
the body and packaging), and select the placement room.
3. Click Add; the countdown will begin.
4. Turn on MultiTransmitter by holding the power button for 3 seconds. Keep in
mind that the request to connect to the hub is transmitted only when the
integration module is turning on.
