For the detection and pairing to occur, the integration module should be located within the
coverage area of the hub’s wireless network (at the same guarded object).
If the connection has failed, disconnect MultiTransmitter for 5 seconds and try
again.
If the integration module has already been assigned to another hub, turn off the
integration module, and then follow the standard addition procedure.
The connected integration module will appear in the app, in the hub’s list of
devices. Updating device statuses in the list depends on the ping time defined in
Jeweller settings. The default value is 36 seconds.
MultiTransmitter states
Icons
Icons display some of the MultiTransmitter states. You can view them in the Ajax
app, in the Devices tab .
Icon
Value
Jeweller signal strength — displays the signal strength between the hub and
MultiTransmitter
A fire detector connected to MultiTransmitter has registered an alarm
MultiTransmitter battery charge level
MultiTransmitter has a malfunction. The list is available in the integration module
states
MultiTransmitter works through a ReX radio signal range extender
States
