Two options are available:
Note that the system will ignore only the
disabled device. Devices connected via
MultiTransmitter will continue operating
normally
The system can also automatically deactivate
devices when the set number of alarms is
exceeded or when the recovery timer expires.
User Guide
Opens MultiTransmitter User Guide
Unpair device
Unpairs MultiTransmitter, disconnects it from the
hub, and deletes its settings
States of connected detectors and devices
You can find the states of connected wired detectors and devices in the
:
Deactivate entirely — the device will not
execute system commands or participate in
automation scenarios, and the system will
ignore device alarms and other notifications
Deactivate lid notifications — the system will
ignore only notifications about the triggering
of the device tamper button
Learn more about temporary
deactivation of devices
Learn more about auto deactivation of
devices
1. Go to the Devices tab .
2. Select MultiTransmitter in the device list.
3. Click on Devices.
4. Select the device from the list.
