KeyPad Plus can participate in two-stage arming, but cannot be used as a
second-stage device. The two-stage arming process using Tag or Pass is similar
to arming using a personal or general code on the keypad.
Event transmission to the monitoring station
The Ajax security system can connect to the CMS and transmit events and
alarms to the monitoring station of the security company in
SurGard (Contact
ID), ADEMCO 685, SIA (DC-09)
, and other proprietary protocol formats. A
complete list of supported protocols is
. The device ID and the
number of the loop (zone) can be found in
.
Connection
KeyPad Plus is incompatible with Hub, third-party security central units, and ocBridge
Plus and uartBridge integration modules.
Before starting connection
Only a user or PRO with full admin rights can add a device to the hub.
1.
Install the Ajax app and
. Add a hub and create at least
one room.
2.
Ensure that the hub is on and has Internet access (via Ethernet cable, Wi-Fi,
and/or mobile network). This can be done by opening the Ajax app or by
looking at the hub logo on the faceplate — it lights white or green if the hub
is connected to the network.
3.
Make sure that the hub is not in armed mode and does not start updates by
checking its status in the app.
