Maintenance
4.
Attach the SmartBracket mounting plate to the surface using the bundled
screws. When attaching, use at least two xing points. Be sure to x the
perforated corner on the SmartBracket plate so that the tamper responds to
a detachment attempt.
5.
Slide KeyPad Plus onto the mounting plate and tighten the mounting screw
at the bottom of the body. The screw is needed for more reliable fastening
and protection of the keypad from quick dismantling.
6.
As soon as the keypad is xed on the SmartBracket, it shall blink once with
LED
X
— this is a signal that the tamper has been triggered. If the LED does
not blink after installation on SmartBracket, check the tamper status in the
Ajax app, and then make sure the plate is rmly attached.
