Do not install the keypad:
Installing the keypad
Prior to installing KeyPad Plus, be sure to select the optimal location following the
requirements of this manual.
In places where parts of clothing (for example, next to the hanger), power
cables, or Ethernet wire may obstruct the keypad. This can lead to false
triggering of the keypad.
Inside premises with temperature and humidity outside the permissible
limits. This could damage the device.
In places where KeyPad Plus has an unstable or poor signal strength with
the hub or radio signal range extender.
Within 1 meter of a hub or radio signal range extender.
Close to electrical wiring. This may cause communication interferences.
Outdoors. This could damage the device.
1.
Attach the keypad to the surface with double-sided adhesive tape and carry
out
signal strength
and
attenuation tests
. If the signal strength is unstable
or if one bar is displayed, move the keypad or use the
Double-sided adhesive tape may only be used for temporary attachment of the
keypad. The device attached with adhesive tape can at any time be detached from
the surface and fall, which may lead to failure. Please note that if the device is
attached with adhesive tape, the tamper will not trigger when trying to detach it.
2.
Check the convenience for code entry using Tag or Pass to manage security
modes. If it is inconvenient to manage the security at the selected location,
relocate the keypad.
3.
Remove the keypad from the SmartBracket mounting plate.
