1
— External power supply
2
— Backup battery
2.
Run the four-wire cables into the hub. Connect the wires to Hub Hybrid bus
terminals:
+
24V
— power supply input
А
,
B
— signal terminals
GND
— ground
3.
Connect the other end of the four-wire cable to the terminals of the first
device in the line, observing the polarity and the order of wiring. Securely
fasten the cable to the terminals of the device.
4.
If another device is connected to the segment, prepare and wire the cable
for the next device into the terminals.
+
24V
— power supply input
А
,
B
— signal terminals
GND
— ground
5.
Connect other devices to the line, if necessary.
