SIM card settings
Connection settings
Mobile data usage
Keep in mind that data is counting on the hub and may differ from your operator’s statistics.
Reset statistics — resets statistics on incoming and outgoing tra c.
Check balance
Ignore Network Registration Error — when this setting is activated, the hub ignores
errors when trying to connect via a SIM card. Activate this option if the SIM card cannot
connect to the network
Disable communication check with operator — when this setting is activated, the hub
ignores operator communication errors. Activate this option if the SIM card cannot
connect to the network
SIM card 1 — displays the number of the SIM card installed. Click on the eld to go to
the SIM card settings
SIM card 2 — displays the number of the SIM card installed. Click on the eld to go to
the SIM card settings
APN, User name, and Password — settings for connecting to the Internet via a SIM
card. To nd out the settings of your cellular operator, contact your provider’s support
service.
How to set or change APN settings in the hub
Incoming — the amount of data received by the hub. Displayed in KB or MB.
Outgoing — the amount of data sent by the hub. Displayed in KB or MB.
USSD code — enter the code that is used to check the balance in this eld. For example,
*111#. After that, click Check balance to send a request. The result will be displayed
under the button.
Geofence — con guring reminders for arming/disarming the security system when
crossing a speci ed area. The user location is determined using the smartphone GPS
module.
What geofences are and how they function
Groups — group mode con guration. This allows you to:
Manage the security modes for separate premises or groups of detectors.
For example, the o ce is armed while the cleaner works in the kitchen.
Delimit access to control of security modes.
For example, the marketing department employees do not have access to the law
o ce.
OS Malevich 2.6: a new level of security
Security Schedule — arming/disarming the security system by the schedule.
How to create and con gure a scenario in the Ajax security system
Detection Zone Test — running the detection zone test for the connected detectors. The
test determines the su cient distance for the detectors to register alarms.
