OG-ROI Series openGear card v1.6 9
www.aja.com
Signal Indicators on the OG-ROI Series Card
Located at the upper front area of the OG-ROI Series card, the LEDs shown in
below indicate the status of the card's power, signal presence and signal
lock.
Figure 4. LED lights on card
Power LED
Signal Present LED
Signal Locked LED
Power LED
The Power LED indicates the state of the card as displayed in DashBoard. It can be
green, yellow or red.
• Green: no DashBoard card state alarm is present.
• Yellow: a yellow DashBoard card state alarm is present. See DashBoard for
more information.
• Red: a red DashBoard card state alarm is present. See DashBoard for more
information.
Signal Present LED
The Signal Present LED can be green or off.
• Green: incoming signal has been identified and acquired.
• Off: no signal is detected.
Signal Lock LED
The Signal Locked LED can be solid green, blinking green, or off.
• Solid Green: The signal detected matches the reference selected (Auto, HDMI,
Ref In, Free Run) from the Genlock control on the Genlock tab in DashBoard.
Note that in DashBoard, the Status tab shows what signal you are locked to
(HDMI, Reference Input, or Free Run).
• Blinking Green: A signal is present, but it does not match the reference
selected in DashBoard.
• Off: No reference is present.