AJA KONA IP Скачать руководство пользователя

Страница: 8 / 76

KONA IP Transport, Capture, Display v16.0r1 8

www.aja.com

Mac, Windows and Linux Packages

These packages include:

Drivers

AJA device drivers for tightly integrated hardware/software operation.

AJA Control Panel

The Control Panel provides:

• Source selection and control of your AJA hardware
• A block diagram showing the signal routing and processing being performed

AJA Control Room

Control Room is a cross-platform software application for ingest, playback and

output with AJA devices.

AJA System Test

System Test provides accurate and detailed evaluations of drive and system

performance statistics, allowing you to measure the capabilities of your system

for recording and playing back various resolutions and codecs. The application

includes:

•  System Disk Test
•  AJA Device Test
•  Disk + Device Test
•  System Report

The application tests Read and Write, Capture and Playback speeds in both

Megabytes per second and Frames per second. The disk speed tests differ from

standard disk I/O performance applications in that they specifically test the

system under conditions typically encountered with video capture, playback, and

editing.

NOTE: Theoretically the best test is to fill your storage disk to 80% and then test capture

at the highest data rate you will use.

AJA NMOS App

Available for discovery, registration and control via an NMOS compatible control

system. NMOS enables the widest possible interoperability for Video over IP

control systems.

Additional with Mac and Windows Packages

3rd-Party Plugins

AJA provided plugins for popular 3rd-party Professional Video Applications from

Adobe, Avid, Apple, Telestream, and others.

Network Requirements

For uncompressed workflows (SMPTE ST 2022-6 and SMPTE ST 2110) a 10GbE

switch is required.
For SMPTE ST 2110 specifically, a PTP clock source must also be deployed and the

switch must therefore also be PTP aware.

Содержание KONA IP













































































Результаты поиска

Содержание KONA IP

Отзывы:

Похожие инструкции для KONA IP

Бренды по названию

Популярные бренды

AJA KONA IP, Инструкция по установке и эксплуатации

Результаты поиска

Содержание KONA IP

Отзывы:

Похожие инструкции для KONA IP

Бренды по названию

Популярные бренды