KONA IP Transport, Capture, Display v16.0r1 21 www.aja.com
Device Format
The Device Format is the media format written to disk and used in your project.
This is the format that the framebuffer will use and is shown in the Control Panel
using the color blue. It is the format that the third-party application software will
either receive from the AJA hardware, or is sending to the hardware. All icons in
blue are the same as the Device Format used by the framebuffer. Also any text
descriptions in the block diagram that appear in blue indicate that something is
in the Device Format. For example:
• If the input and output icons are blue, you know that the same format is used
throughout the video path. No format conversion is being performed.
• If the input or output icon colors differ (blue input and green output icons for
example), you know that a format conversion is being performed.
Presets
Setups can be named and saved as a snapshot (Preset) for recall at any time. You
can save various AJA device Control Panel configurations associated with your
frequent tasks. You don’t have to spend time resetting interface configurations,
just load the previously saved Preset for each task. See
for more information.
If you work on multiple systems and want to carry your saved setups to another
location, you can copy your saved Preset files on to movable storage and load
them into any computer running the AJA Control Panel application.
Mac OS Preset Files Storage Location
• From the Finder, hold down the Option key (to display the Library directory)
and click on Go/Library/Application Support/AJA/<device name>/Presets/
Windows Preset Files Storage Location
• c:\Users\<username>\AppData\Local\AJA\Control Panel\<device name>
Presets\
NOTE: When you visually browse to the above location, depending on Windows OS
setting you may not be able to visually see the folder referred to in the path.
Instead, you have to fill out the rest of the Windows path manually (i.e. type the
rest of the address in the navigation bar when you hit the "end" of the browsing
path).
Default Preferences
When an AJA device starts up, a preference can determine what settings it will
have it when it begins to operate. The AJA Control Panel offers two default
preference settings:
• Local Preference - A preference stored from the last AJA device's Control Panel
settings to be used on next startup of AJA Control Panel. This occurs on next
restoration of the default state (triggered by start up of host CPU, startup of
the AJA device, or when a third-party application releases the AJA device).
• Global Preference - A preference saved for use as a global default start state
for an AJA device that can be shared by multiple users, applied on first startup,
or by pressing the Control Panel
Reset Device...
button.
