HELO Plus H.264 Streaming and Recording Encoder v1.0 59 www.aja.com
Filtering Field
Filter your view of the files by entering filter criteria in the Filter field in the upper
right area of the Recordings file directory.
The filter works on all the fields for each file, not just the name. For example,
filtering on ".mp4" will show only mp4 files, and filtering on "2017-10-01" will show
all files recorded on October 1st, 2017.
Data Transfer Mode
Figure 12. Recordings Directory Headings with Data Transfer Mode On
Data Transfer
Button (On)
Download
Button
Files Selected
for Download
Any of the files shown in the directory can be downloaded.
Click on the Data Transfer Mode button to turn on Data Transfer Mode. The
Download button appears. HELO Plus cannot record or stream when transferring
data. When on, the Data Transfer button turns yellow, and the Record, Stream,
and Link buttons turn gray.
When Data Transfer Mode is turned on, the Data Transfer Mode button arrows are
yellow and the Download button displays.
Select the check boxes corresponding to the files you want to download. Once
checked, select the Download button. The selected files will download to your
computer immediately.
Click the Data Transfer Mode button again when all downloads are complete to
return to normal operation and re-enable recording and streaming.
Do not click the Data Transfer Mode button before downloads complete, or any
that are in progress will be aborted.
Deleting Files
Similarly, if you want to delete files, select them with the check boxes, then select
the Trash button. The selected files will be deleted.
Files can be deleted at any time. Entering Data Transfer mode is not required.
You cannot delete the file currently being recorded.
Be careful before confirming the deletion of files, especially if using the
checkmark to select all files. Double-check to ensure the selection is correct,
including files that may require scrolling down to see. Deleted files cannot be
recovered.
When files are being downloaded or deleted, the media LED corresponding
to that storage, if there is one—there is no LED for network shares—will flash
rapidly, indicating the storage is in use and should not be removed.
In the case of small numbers of small files, the operation may complete before the
flashing becomes apparent.
