HELO Plus H.264 Streaming and Recording Encoder v1.0 18 www.aja.com
Chapter 4 – HELO Plus Web Interface
Overview
Direct Front Panel Control
Once installed and configured for operation, HELO Plus can be controlled
by simply pressing the front panel Record and Stream buttons. To change
HELO Plus’s configuration settings and for remote control of HELO Plus, use
HELO Plus’s web interface.
Remote Control
An optimized web server in HELO Plus allows remote control and parameter
adjustments via a web browser client running on a network connected
computer. The network can be a closed local area network, a straight computer-
to-HELO Plus cable, or even exposed through a firewall to a broadband WAN.
HELO Plus uses a standard RJ45 LAN connection, and communicates via standard
“straight-through” CAT 5 Ethernet cables or null-modem (cross-over) cables
without any configuration or strapping required.
NOTE: Safari is the preferred web browser for control on the Mac, and additionally
Chrome and Firefox on Windows. Other web browsers may work, but AJA cannot
guarantee consistent operation for all web browsers or web browser versions.
To connect to HELO Plus, simply attach HELO Plus to your network and enter
HELO Plus’s IP address into the web browser. If authentication has been
configured, you may need to enter a password.
