Aiwa HV-GX935Z, Руководство по эксплуатации

Страница: 20 / 32

ENGLISH
17
Setting the timer manually
If you cannot use ShowView system, you can set the timer
recording manually.
You can set up to 7 programs within one month of the
current date.
Before setting the timer
• Turn on the VCR and TV and set the TV for VCR
reception.
- Press TV/VCR to display “VCR” in the display window.
• Check that the VCR clock is set correctly.
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
• To set the timer for a satellite, cable TV or PAY-TV
channel, check that the satellite (or cable) receiver or PAY-
TV decoder is turned on and the channel you want to
record is selected.
Press i/MENU.
Press j or l to select REC, then press
OK/CLK/CNT.
Press OK/CLK/CNT to begin setting the timer
recording program.
Number
buttons
1
2
3
4
5
6
i/MENU
POWER
i+ / k-
OK/CLK/CNT
j / l
PR DATE T I M E
SP
– – – – – – : – – ~ – – : – –
– – – – – – : – – ~ – – : – –
SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
,
DELETE:
PR DATE T I M E
SP
– – – – – – : – – ~ – – : – –
– – – – – – : – – ~ – – : – –
SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
PR DATE T I M E
SP
– – – – – – : – – ~ – – : – –
ARD – – – – : – – ~ – – : – –
SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
Enter the channel position using the number
buttons.
• When selecting the numbers less than 10, press 0 to
enter the ten’s digit, then press the button 1 through 9
to enter the one’s digit.
• You can also select the channel using i+ or k- ,
then press l .
Enter the date using the number buttons.
• If you want to set daily/weekly recordings, see “To set
the daily/weekly timer” on page 18.
• You can also select the date using i+ or k- , then
press l .
Set the start time (hours and minutes), and end
time (hours and minutes) using the number
buttons.
• When selecting the numbers less than 10, press 0 to
enter the ten’s digit, then press the button 1 through 9
to enter the one’s digit.
• You can also select the start and end times using
i+ or k- , then press l .
Press i/MENU.
The timer program list sorted by the start time appears.
If you want to set another program, repeat
steps 3 through 7.
Press i/MENU to return to the normal screen.
Press POWER to turn off the VCR.
• “TIMER” appears in the display window, and the VCR
stands by for timer recording.
• The cassette is ejected and the cassette-in indicator in
the display window flashes if the cassette’s erasure
prevention tab has been removed. “NO TAB” flashes in
the display window.
• If a cassette is not inserted, the cassette-in indicator
flashes.
TV/VCR
7
8
9
10
AV
REC
REC
TIME
DATE
SYS-
TEM OSD
OPR
ON
OFF
f
OSD
PR DATE H E U R E
SP
– – – – – – : – – ~ – – : – –
ARD 1 7 2 1 : 4 5 ~ 2 2 : 4 5
SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP
– – – – – – : – – ~ – – : – – SP