20
EN
EN
FR
IT
PT
DE
open window, it turns off the zone after 60 seconds (displaying an
Open window notification on the app). It is off by default. In order to
activate this feature, configure it as Normally open or Normally
closed.
o
Occupancy.
It determines the state of the module of a zone based on
the occupancy. It only has effect on the zone module if it is associated
to a controller (it does not operate in secondary zone modules). When
this contact is on, if the zone is empty for over 5 minutes, the Sleep
90 feature is activated (displaying an Occupancy notification on the
app). It is off by default. In order to activate this feature, configure it
as Normally open or Normally closed.
−
Information.
This parameter provides information about the zone and the
connected elements.
Users
Shows all the users allowed to control the installation and the type of control to perform
(advanced or basic).
To give access to the control of the server to a new user click on “Add user”, enter required
data and the type of control allowed to perform. To complete the process, press save.
To remove an user, press on the user and select “Remove user”.
