26
ES
EN
FR
IT
PT
DE
IMPOSITION MODE
While creating schedules, you will be requested to select an imposition mode:
Forced mode (
): Supermaster controller imposes its mode to all systems. At the end of
schedule, it will send a
command
to all zones if it is a Time schedule or a
command in if it is
Mode schedule.
Semi-Forced mode (
): This type of schedule varies depending on the type of schedule.
In temperature schedules, the Supermaster sends an ON command (Temperature or
) every
hour. No system checking is performed.
For Mode schedules, it checks first if the mode imposed is available in every system.
Free mode (
). The mode or temperature chosen is only sent once at the beginning of the
Schedule. A
command or a
command
is sent at the end.
Remember:
In case of overlap, the logic of the system will follow the priority chart.
CREATE A SCHEDULE
* Note:
At any moment while configuring you can go back to previous step by pressing
icon.
* Note:
You can always go back to the previous step by pressing on
.
From the main screen, press on
icon.
Then, press on .
Use the arrows
to select the type of schedule you want to set, Temperature schedule (
)
or mode schedule (
) and press on
to confirm.
Note:
From this moment on, Supermaster controller will display the
icon for
temperature
schedules and
the
for
mode
schedules.
Use the arrows
to select the day or group of days (they will be flashing). Press
to
confirm.
Note:
If the day or group of days you have already a program configured, icon(s) will stay still on any
selection. For example, if on Monday (1) there is already a program configured, on individual day selection,
it will stay still instead of blink. For other selections like week days of whole week it will blink.
Select the schedule to configure (
), by using selection arrows
and press
to confirm. The schedules already configured while remain steady while available schedules will flash.
If there is any schedule already activated, Supermaster controller will display
icon. Otherwise it will display this
symbol
:
. Press
icon either to modify or to set the starting time. You will now have to set the starting time. The
value to be configured will flash. Use the arrows
to choose the time and press
to confirm.
