24
ES
EN
FR
IT
PT
DE
TIME SCHEDULE
Supermaster controller allows you to simultaneously apply Mode schedules (
) or Temperature
schedules (
) to all the zones.
You can define the imposition mode applied in each zone (forced, semi-forced or free).
Note:
Time schedules report the range temperature.
Time programming is independent for each control group. That allows different programming for each
control group
or a common programming for all groups
.
AUTOMATIC OPERATING MODE SELECTION
This mode executes previously created schedules. To use this operation mode, it is mandatory to fix the
time of your Supermaster controller.
Note:
The automatic operation mode can be activated regardless of whether or not there is any active schedule.
To activate the automatic operation mode, press on the icon
on the main screen. Then press on the
automatic mode icon
, and use the arrows
to select the schedule you want to activate and press
on
to confirm.
If you select mode schedule (
), you will see this icon
.
If you select temperature schedule (
), you will see this icon
. The temperature and time values
alternate on the screen every 5 seconds. In this case, the operating mode can be change manually.
If you select both schedules (
), these icons
will be displayed. The set-point temperature and
the time alternate every 5 seconds.
If there is any active schedule, you will see this icon
. It is also shown if the last order sent is to start
or to finish
.
In order to switch off schedules, just press on
on the main screen.
