ASSEMBLY INSTRUCTIONS FOR ALL MODELS
KEY
PART NO. DESCRIPTION
QTY
1
521257
GRIDDLE PLATE
1
2
212219
CONTROL KNOB
2
3
212346
GREASE TRAY
1
4
212352
HARDWARE BAG
(BOLTS/
WASHERS/SPACERS 4 EACH)
1
Please read all instructions thoroughly before proceeding.
1.
Find a large, clean area in which to assemble your Suburban
Elite Series Griddle.
NOTE:
Make sure all the plastic
protection and packaging is removed before assembling.
2.
Remove packing material and all parts from the
carton. Packing material and carton can be retained
for storage if desired.
NOTE:
Packout bag can be found under griddle plate.
3.
Refer to the parts list on page 3. Ensure that all components
are contained in the package.
4.
Remove the griddle top from the griddle body.
See
Figure 1.
5.
Carefully flip your griddle upside down and ensure each
fuel nozzle is housed within each burner tube opening.
See Figure 2.
6.
Turn griddle right side up and align the Control Valve
Knob with the Control Valve Shaft and press fully into
place.
See Figure 3.
7.
Install grease tray onto the back control panel.
8.
Place the griddle plate in position on top of the griddle body.
Figure 1
CONTROL KNOB
Figure 2
4
Figure 3
GREASE DRAWER
CONTROL KNOB
1
3
2
CONTENTS
Please inspect the contents carefully.
This package contains the following
parts:
