9
Scholar V Installation & Startup Manual 07/2016 New
A. Main Screen
The first screen is the main screen and contains the following:
Room Temperature Read-out
Displays real time room temperature
Room Relative Humidity Read-out
Displays real time room relative humidity
Fault Reset
Press this button once to clear any faults that may have occurred
Set-Points
Press this button to go to another screen with the set points
Cooling
Press this button once to enter the cooling mode. The chosen operating mode is
shown at the bottom of the screen.
Heating
Press this button once to enter the heating mode. The chosen operating mode is
shown at the bottom of the screen.
AutoCool/Heat
This mode will allow automatic change-over from Cooling to Heating and vice-versa.
When this mode is being used, the cooling set point is established by the end user
and the heating set-point is calculated by applying a differential to the cooling set
point. In this mode, the heating set-point will always be less than the cooling set/
point.
Emergency Heat
In this mode, all compressor functions are disabled and heating is provided with
electric resistance heating elements.