34
Eubank 7AA1024A-1060A & 7AA2036A-2060A I&O Manual
07/2021 Rev.3
3.3 Installation Materials
Installation Kits
Eubank air conditioners are shipped with one 12 Ga. "L" shaped bottom bracket. If you have not yet
unpacked the unit, follow the instructions in section 2.1. All units have built-in full length mounting
flanges. Therefore, use of mounting brackets is not required.
Kit Components:
1. One 12 Ga. "L"-shaped bottom bracket.
Accessories:
The package may include other factory-supplied items (optional) as follows on the next page:
Controllers/Thermostats
CommStat 4 HVAC Controller, Solid State Lead/Lag Controller ......................................P/N S/07846
CommStat 3 HVAC Controller, Solid State Lead/Lag Controller ......................................P/N S/04581
Digital thermostat. 1 stage heat, 1 stage cool. 7 day programmable. Fan switch:
Auto & On. Auto-change over. Keypad lockout. Non-volatile program memory. ................ P/N 50123
Digital thermostat. 2 stage heat, 2 stage cool. 7 day programmable. Fan switch:
Auto & On. Auto-change over. Status LED’s. Backlit display.
Programmable fan. Non-volatile program memory. .............................................................. P/N 50107
Grilles/Wall Sleeves
Supply Grilles
For 7AA1024A .......................................................................................................................P/N 80675
28” x 8” (711 mm x 203 mm)
For 7AA1030A, 1036A, 1042A, 1048A, 1060A .....................................................................P/N 80676
30” x 10” (762 mm x 254 mm)
For 7AA1060A Reverse Flow ................................................................................................P/N 93197
30” x 16” (762 mm x 406 mm)
Return Grilles
For 7AA1024A .......................................................................................................................P/N 80678
28” x 14” (711 mm x 356 mm)
For 7AA1030A, 1036A, 1042A, 1048A, 1060A .....................................................................P/N 80679
30” x 16” (762 mm x 406 mm)
For 7AA1060A Reverse Flow ................................................................................................P/N 93198
30” x 10” (762 mm x 254 mm)
Return Filter Grilles
Used when filter must be changed from the interior. Not recommended for air conditioners with an
economizer.
Note:
Filter used in Return Filter Grille is 1” (25 mm) thick.
For 7AA1024A .......................................................................................................................P/N 80672
28” x 14” (711 mm x 356 mm)
For 7AA1030A, 1036A, 1042A, 1048A, 1060A .....................................................................P/N 80673
30” x 16” (762 mm x 406 mm)
Additional Items Needed:
Additional hardware and miscellaneous supplies (not furnished by Eubank
®
) are needed for installation.
For example, the list below contains approximate quantities of items typically needed for mounting
a unit on a wood frame wall structure. Concrete or fiberglass structures have different requirements.
