Airwell SX 12 RCC, Руководство пользователя

Страница: 8 / 33

8
INSTALLATION
- Remove the wall support mounted at the rear
of your SX
- To install the wall support, locate the
template in order to observe the correct
distance between mounting holes marked on it.
CAUTION - be careful with the condensate
evacuation point:
After determining the outlet for the
condensate evacuation (LH, RH, rear), make
sure that the wall mounting is installed with
a slope which favours this evacuation.
-Secure the wall support with 4 screws (not
supplied)
Mounting holes for wall installation
Location of threaded rods (Dia 8 mm max.)
for ceiling installation
Condensates evacuation
-Take care to install unit with a positive
slop for condensate drainage
SX
Split system for wall / ceiling mounting
MANUAL MENU