Manual
Operations
Page 11
2
Avoid
button:
1. In any mode of boot, press the button to turn on the function
.
2. Press “ ” , “ ”, “ ” close this function
.
3
Pow er
button: Operation starts when this button is pressed and stops when you press the
button again.
5
Sw ing
button:
1. This button is used to set the horizontal and vertical airflow.
2. Each time the airflow direction button is pressed, the settings change as follows: Set
vertical airflow
→
Cancel vertical airflow
→
Set horizontal airflow
→
Cancel horizontal airflow
→
Set simultaneous vertical and horizontal airflow
→
Cancel simultaneous vertical and
horizontal airflow
→
Set horizontal airflow.
WARNING:
Manually moving the horizontal and vertical airflow direction louvers could damage
the air conditioner.
6
button
1.
Under the Test Running mode, press " " " " to be able to check view indoor, outdoor,
fault code
.
In other states,press the " "and" " to adjust the temperature within a range of 16 °C/17
°
C~30
°
C
or 20
°
C~28
°
C
，
To cut to 16 °C/17
°
C or 20
°
C
again when press downward adjustments set temperature no longer
change;
To rise to press adjusted upward again when 30 °C or 28
°
C
set temperature no longer change.
When setting the temperature, the key cannot adjust the temperature quickly, it can only be
achieved by pressing up and down.
2.
4
Fan
button: This button is used to select the desired fan speed. Each time you push the
button, the fan speed is shifted in the following sequence:
LOW MED HIGH AUTO
Fan speed display:
Select LOW fan speed and zones 1~2 will illuminate.
Select MED fan speed and zones 1~4 will illuminate.
Select HIGH fan speed and zones 1~6 will illuminate.
Select AUTO fan speed and zones 1~7 and “AU” will illuminate .
Note: When using the remote control to choose strong wind, wind speed 1~7 will illuminate.
1 2 4 6 7
